A Square Shawl

A Square Shawl

Heart blanket full view

On Monday I finished knitting the endless border on my version of the Square Shawl in the Knitter’s Almanac by Elizabeth Zimmermann. It started with some mystery yellow yarn in my stash and size 7 needles. I started as per EZ with Emily Ocker’s circular cast on of 8 stitches onto double points. There are 2 increases at each corner so the project progresses fairly quickly to a sixteen inch circular and then onto the 29 inch circular.

Of course, more yarn was needed. At Jo-Ann Fabrics I discovered that my mystery yarn is Bernat Baby Coordinates, 75.2% Acrylic, 22.2% rayon and 2.6% nylon in DK weight. It is crinkly with shiny bits from the nylon. I bought 2 skeins of iced mint to avoid any dye lot problems even though Baby Coordinates claim to be no dye lot. (They call the yellow lemon custard—I am a sucker for color names. Color numbers are boring and don’t really say anything about what the maker thinks of the yarn.)

So around and around I go pleased with getting the cast on right—it pulled the center gently tight just like it is supposed to. The yarn over increases at the corners looked very pretty and friends were teasing me about making a big bag. Just like EZ said in Knitter’s Almanac, “. . . early in the shawl those areas of plain knitting between the increases will begin to appear somewhat bland and you will start thinking of embellishments.” and she was right. I found a Sweetheart Lace pattern in the Stitch ‘N Bitch Superstar book. One heart takes 10 rows, then add 2 more, then two more, do a stripe pattern and reverse keeping the heart shaping and the increases on the same rows.

Heart blanket close up heart lace

Around and around I go. It is time to think about a border. I found a pretty and simple picot border in 200 Knitting Tips, Techniques & Trade Secrets by Betty Barnden. I have read that there are knitters who will knit a border and sew it on. I will do almost anything to avoid sewing seams of any sort. I don’t mind a three needle bind off for seams and I’m pretty good at Kitchener stitch weaving but sewing a border on a project grown to 496 stitches was not for me.

EZ knits on the border and it works like a charm. Provisionally cast on 6 stitches. The picot pattern increases to 8 stitches and decreases back to 6 picking up a stitch from the body every other row creating a pretty rounded border. I fretted a bit about how to get around the corners. The answer is simple. Do an extra unattached row on either side of the center corner stitch and around you go. It is not a sharp corner but I didn’t want a sharp corner.

The border seemed to go on forever. I was watching episodes of “Warehouse 13” and beginning to suspect as I got closer to the end that the shawl was unraveling itself after I put it down just as if it was one of the Warehouse 13 supernatural artifacts. Not so, I did reach the end, my provisional cast on came apart with just a little coaxing and I wove it and the finished end together. Pretty slick. I did some rusty math and calculated that with 496 stitches, attached to the border every other row with 8 extra rows around the corner that the border is 1000 rows. Now that accounts for the forever feeling

Heart blanket border lace

 

Advertisements

Frog Finger Puppet for Jenny

Before I begin let me explain Knitting in the Tire Swing. My friend, Rob Hunter, has written a book called Midwife in the Tire Swing — It’s About Time (Creative Commons Attribution 3.0 License.) Sarah Drye the midwife or doula and her father, Lucian Hobart, reach out to each other under, over and through time with many side trips and diversions. Sarah is a quilter but, as I see it, other midwives and doulas are knitters, crocheters and passionate crafters and thinkers of all sorts. For me this ride in the tire swing is about knitting and whatever else jumps out of the keys. You can find Rob Hunter, Midwife in the Tire Swing and his other work at www.onetinleg.com.

Jenny is an elementary school teacher, a fellow knitter and the best friend of my daughter, Melissa. I’ve been making finger puppets for her to use in her classroom. So far a donkey, pig, bull, farmer girl and a monkey.

These are mostly based on the finger puppet directions by Priscilla Gibson-Roberts in Weekend Knitting by Melanie Falick (Stewart, Tabori and Chang, 2003.) The monkey is adapted from a design by  Tommy  Smith who writes the blog Yes I knit  (http://ohyesiknit.blogspot.com/) I like the Gibson-Roberts designs because they use fingering yarn and small double point needles. They look delicate, proportional and require skill and patience to make though they are, in fact, quite sturdy.

Jenny casually mentioned that a frog puppet would be fun. I thought I could alter one of the Gibson-Roberts designs which seems like it should be easy except that I don’t really understand how to manipulate short rows. I can do them from directions but get confused when I try to apply them to my own designs or alterations. I looked for frog finger puppet patterns on the internet and on Ravelry and have yet to find one that was satisfactory or that I was willing to pay for so this has turned into a challenge and her birthday is in two weeks!

On Craftsy I found an intriguing frog toy. The Super Sonic Froggie designed by Phoeny of Phoenixknits (http://www.ravelry.com/stores/phoenixknits.) Elastic runs from the arms through the body so it can take great frog like leaps. Making this will have to be another project. The three-part eyes are the interesting part–outer lid, eyeball and lower lid. The designer used sport or DK weight yarn on size three needles. I have the right yarn in colors that will work left over from another project. Can it be scaled down to finger puppet size with the eyes from the Craftsy design and the delicacy and proportion of the Gibson-Roberts design?

Stay posted.

I found another design for a frog on the Craft Yarn Council of America  (CYCA) website. It is a very simple design for beginners. It uses worsted weight yarn, knits flat, the features are made of felt and glued on and it has very little shaping. Okay, so there are three ideas–guidelines so to speak–and Jenny’s birthday is coming soon.

I used the emerald-green and bright yellow yarns from a previous project  (Modern Baby DK by Lion Brand) and size US3 double point bamboo needles. Starting at the bottom following the CYCA pattern I cast on 18 stitches, divided onto three needles for in the round construction and did three garter stitch rows for a border. Then, I knitted on up for two and one half inches for a body that fits over my finger. This is the way Gibson-Roberts does it except she starts at the top with the head, turns like a sock heel and then goes down the body. My frog head increased to 30 stitches to make a bulb shape and at the top closed by pulling  half the stitches together on either side to suggest eye humps like the CYCA pattern. I would have liked to make the mouth area bulge out in a frog like manner but  again came up against the short row problem. So, I compromised by pushing extra stuffing into the face area and embroidering a mouth to make the shape.

The most interesting part was the eyes that I found in the Craftsy pattern by Phoeny of Phoenixknits on Ravelry. I used just the eyeball and fitted it into the eye sockets I created in the head with finger shaping and stuffing. The eyeball grows by increases from five stitches to twenty stitches using black, green and yellow. A clever addition by the designer is a small embroidered white dot in the center of the eye which, as you can see below, really brings it to life.

To finish, I stuffed the head shaping eye sockets and pushing out the mouth with my fingers. All ends were run into the body and out through the head to be cut off. The last touch was to make the little arms the way Priscilla Gibson-Roberts does it. Push the body flat so you can see the exact side row, pick up 3 stitches from armpit to shoulder and then 3 more in the other sides of the same stitches. Work in the round until they look long enough, gently push in just a little stuffing, change colors and do a hand. Decrease the hand stitches to 3 and fasten off. These arms make the little puppet look like it is reaching out  and adds a friendly look.

I am pleased with the way the frog puppet turned out. It looks cheerful, friendly and well made. My husband and daughter thought it looked more like a space alien. I really need to learn more about short row shaping.

I fussed over this for so long that I missed Jenny’s birthday. However, she came to visit  later in the month. Anxiously I made the presentation. She opened the box ,pulled back the inner wrapping and declared in a most gratifying way, “You did it. A Frog!”

Then she said that her kindergärtners enjoyed the frog but what they need now is an–ELEPHANT!

 

Frog Puppet

Continue reading